Assembly
Leica M220 F12 / Ref. 10 716 922 / Version 03 47
2.2 Mounting the optics carrier
1
2
3
Use only the screws provided to fasten the optics carrier.
These are pretreated with threadlocker.
X
Fasten the optics carrier to the swing arm using the
4 pretreated Allen screws (1) provided.
X
The red arrows (2) on the swing arm and optics carrier must be
positioned one above the other.
X
Unscrew the 4 Phillips head screws (3) of the focus cover.
X
Remove the focus cover.
4
X
Feed the cable from the swing arm into the right plug on the
board.
X
Secure the cable using the cable clamp and 2 Allen screws (4).
Make sure that the wire cloth of the cable touches the cable
clamp.
X
Reinstall the focus cover using 4 Phillips head screws.
5
X
Loosely fasten the cable on the swing arm using the cable tie
(5).
