EN
60
Picture mode
ISO SENSITIVITY
The ISO setting covers a range of ISO 100 - 50000, and thus
enables you to adapt to the relevant situation as required.
As well as the fixed settings, the camera also features the
A
function, in which the camera automatically adjusts the sensitivity
to the ambient brightness and the shutter speed/aperture settings.
In conjunction with aperture priority mode, this function extends
the range for automatic exposure control. There is more leeway for
the use of preferred shutter speed and aperture combinations
when setting the exposure manually. You can set priorities within
the scope of the automatic setting, e.g. for reasons of picture
composition.
Note
When high ISO values are used or the image is edited later, image
noise, as well as vertical and horizontal stripes may become visible,
particularly in front of larger, evenly lit areas of the image subject.
Choose a click values engraved on the ISO setting wheel or the
positions:
–
A
: for automatic setting; values between ISO 200 and 50000 will
be used
–
100
-
6400
: Fixed ISO values
–
M
: for intermediate values, z. B. 250 or for values greater than
6400
WHEN A FIXED ISO VALUE ENGRAVED ON THE ISO SETTING
WHEEL IS TO BE SELECTED
▸
Turn the ISO setting wheel to a position in which the desired
value or setting matches up with the alignment point
• The set value is displayed:
– in the viewfinder (for approx. 2 s instead of the shutter
speed)
– in the display (only if the settings were called up before-
hand)
Summary of Contents for M10- P ASC 100 Edition
Page 1: ...LEICA M10 P Instruction manual ...
Page 19: ...EN 19 ...
Page 45: ...EN 45 Camera operation ...
