background image

3

Leica HI1220 Flattening Table

The information, numerical data, notes and value 

judgments contained in this manual represent 

the current state of scientific knowledge and 

state-of-the-art technology as we understand it 

following thorough investigation in this field. 

We are under no obligation to update the pres-

ent manual periodically and on an ongoing basis 

 according to the latest technical developments, 

nor to provide our customers with additional cop-

ies, updates etc. of this manual.

To the extent permitted in accordance with 

the national legal system as applicable in each 

individual case, we shall not be held liable for 

erroneous statements, drawings, technical illus-

trations etc. contained in this manual. In particu-

lar, no liability whatsoever is accepted for any 

financial loss or consequential damage caused 

by or related to compliance with statements or 

other information in this manual.

Statements, drawings, illustrations and other 

information regarding the contents or technical 

details of the present Instructions for Use are 

not to be considered warranted characteristics 

of our products.

These are determined only by the contract 

provisions agreed between ourselves and our 

customers.

Leica reserves the right to change technical 

specifications as well as manufacturing process-

es without prior notice. Only in this way is it pos-

sible to continuously improve the technology and 

manufacturing techniques used in our products.

This document is protected under copyright laws. 

All copyrights to this documentation are held by 

Leica Biosystems Nussloch GmbH.

Any reproduction of text and illustrations (or of 

any parts thereof) by means of print, photocopy, 

microfiche, web cam or other methods—includ-

ing any electronic systems and media—requires 

express prior permission in writing by Leica 

 Biosystems Nussloch GmbH.

For the instrument serial number and year of 

manufacture, please refer to the nameplate on 

the back of the instrument.

© Leica Biosystems Nussloch GmbH

NOTE

Leica Biosystems Nussloch GmbH

Heidelberger Str. 17 - 19

D-69226 Nussloch

Germany

Phone:  +49 (0)6224 143-0

Fax:    +49 (0)6224 143-268

Internet: http://www.LeicaBiosystems.com

Summary of Contents for HI1220





















Reviews: