Leica GR10, Operational Manual

Page: 128 / 317

6: Context sensitive help
GNSS management: Logging sessions
Background Information
Logging sessions are used to log observations in the data file type MDB, RINEX or Compact RINEX (Hatanaka) for
later use in post processing.
•
A logging session must be active in order to begin logging.
•
All files can be directly imported into Leica Geo Office (LGO). All MDB files can also be downloaded via
GNSS Spider.
•
If you wish to push the logging session data to an FTP server, an FTP location needs to be configured
before starting the logging session wizard. An FTP location is configured via the menu option GNSS
management / FTP locations. An FTP location contains the information needed to access an external FTP
server, such as server name, user name and password.
•
An SD card must be inserted in the receiver to log data. The SD card can run full if the logging session
data files are not removed (e.g. by autodelete or FTP push). Activate the
Smart clean-up
functionality to
ensure that the SD card will not run full.
Field Descriptions
The table below describes the fields in the Sessions tab.
Field Description
Icon Session is active.
Session is inactive.
To activate or deactivate a session press the Activate icon.
Name
The configured logging session name.
Click the logging session name to view additional properties . Use this
functionality to quickly check the configuration of the logging session.
Data type
The configured data type: MDB, RINEX or HATANAKA.
Session priority
The configured session priority which determines the Smart clean-up
tasks.
When Smart clean-up is active and the SD card is running full, data
from low priority sessions is deleted first, high priority sessions are
preserved as long as possible. When Smart clean-up is off, this
setting has no influence.
Go to GNSS management / Logging sessions / Smart clean-up tab
for further information and to enable the Smart clean-up functionality.
127