Leica GR10, Operational Manual

Page: 112 / 317

6: Context sensitive help
Outgoing data stream wizard: Configure BINEX data stream
Background Information
BINEX (Binary Exchange Format) is an exchange format for GNSS data defined by UNAVCO. You can find more
information about BINEX at http://binex.unavco.org. The configuration wizard includes a check box table which
enables and disables individual BINEX messages.
Setting Descriptions
The table below describes the settings that can be configured on the Configure BINEX data stream page.
Setting Description
Message
The data rates may be specified for each of the following messages:
•
BINEX 0x00 Site Metedata output control
•
BINEX 0x01 GNSS Navigation Information output control
•
BINEX 0x7d Receiver Internal State output control
•
BINEX 0x7e Ancillary Site Data Prototyping output control
•
BINEX 0x7f GNSS Observable Prototyping output control
Rate list box
Select the data rate for the BINEX messages.
•
When new data available:
The receiver will send the message whenever new
data is available. e.g. whenever the receiver receives new ephemeris data for a
certain satellite. This option is only available for BINEX 0x01 GNSS Navigation
Information output control.
Press to go back to the previous wizard step. Press to continue to the next wizard step.
Press to cancel and return to GNSS management: Outgoing data stream .
111