Leica GPS900 Series Technical Reference Manual Download Page 265

Page: 265 / 287

Working with Survey

GPS900

265

33.5

Configuring the Program - Setting the Display Mask

Setting
the display mask

CONT

(F1)

To accept the screen entries and continue.

CLEAR

(F4)

To clear all the fields except the first field.

DEFLT

(F5)

To recall the default settings.

Field

Description of Field

Fixed Lines

•

From 0 to 5. Defines how many lines do not scroll in the screen.

1st Line to 16th Line •

For each line one of the following options can be selected.

•

Attrib (free) 01-04

. Output field for attributes for free codes.

•

Attrib 01-03

. Input field for attributes for codes.

•

Code (auto)

. Choicelist or input field for codes.

•

Code (free)

. Output field for free codes.

•

Code Desc

. Output field for description of codes.

•

Code Desc (free)

. Output field for description of free codes.

•

Code Type

. Output field for the type of code.

Summary of Contents for GPS900 Series
































































































































































































































































































Search results

Summary of Contents for GPS900 Series

Reviews:

Related manuals for GPS900 Series

Brands by name

Popular brands

Leica GPS900 Series, Technical Reference Manual

Search results

Summary of Contents for GPS900 Series

Reviews:

Related manuals for GPS900 Series

Brands by name

Popular brands