Leica GPS1200+ Technical Reference Manual Download Page 687

Page: 687 / 1442

STATUS

687

Next step
PAGE

(F6)

changes to the Device page. Refer to paragraph "STATUS Real-Time, Device

page".

STATUS
Real-Time,
Device page

The content of this page differs for each type of device in use.

For all devices available
Description of fields

CONT

(F1)

To exit STATUS Real-Time.

ACCNT

(F3)

Available for SMARTgate device. To view
SMARTgate account information. Accesses

STATUS SMARTgate Account Information

VERS

(F4)

Available for SMARTgate device. To view
SMARTgate version information. Accesses

STATUS SMARTgate Account Information

PAGE

(F6)

To change to another page on this screen.

Field

Description

<Name:>

The name of the device.

Summary of Contents for GPS1200+



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GPS1200+

Reviews:

Leica GPS1200+, Technical Reference Manual, Page: 687 / 1442

Search results

Summary of Contents for GPS1200+

Reviews: