Leica GPS1200+, Technical Reference Manual

Page: 233 / 1442

Coding 233
11 Coding
11.1 Overview
Description A code is a description which can be stored with a point, line, area or alone.
Coding on is very flexible with thematical, free and quick coding being available.
Thematical and free coding is possible by selecting codes from a codelist or by directly typing
in codes. SmartCodes are a quick way for a code to be stored with a point to be selected and
to be measured.
)
For coding, points, lines and areas have the same behaviour. In this chapter, the word object
is used as a generic term for points, lines and areas.
Coding methods
Coding
method Characteristic Description
Thematical Use To store a description together with an object inside
an application program or in
Main Menu:
Manage...\Data .
Selection of the codes • For thematical coding with codelist:
On a configured display mask, codes are
selected from the job codelist in a choicelist. The
job codelist must contain thematical codes.
• For thematical coding without codelist:
On a configured display mask, codes are manu-
ally typed in.