Leica GPS1200+, Technical Reference Manual, Page: 187 / 1442

Manage...\Data 187
9.4.2 Creating a New Line/Area
)
The functionality of all screens and fields are similar for the creation of both lines and areas.
The step-by-step instructions for creating a new line can be applied for areas.
Access Refer to "9.2 Accessing Data Management" to access MANAGE Data: Job Name .
OR
Press a hot key configured to access the screen MANAGE New Line / MANAGE New
Area . Refer to "6.1 Hot Keys" for information on hot keys.
Create line step-by-step The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description Refer to
chapter
1. MANAGE Data: Job Name
2. PAGE (F6) until the Lines (X) page is active.
3. MANAGE Data: Job Name , Lines (X) page
4. NEW (F2) to access MANAGE New Line .
5. MANAGE New Line , General page
<Line ID:> The name of the new line. The configured ID template for
lines is used. The ID can be changed in the following ways:
• To start a new sequence of line ID’s type over the line ID.
• For an individual name independent of the ID template
SHIFT
INDIV (F5) . SHIFT RUN (F5) changes back to the next ID from
the configured ID template.