Leica GPS1200+, Technical Reference Manual, Page: 147 / 1442

Manage...\Jobs 147
8.4 Editing a Job
Access Refer to "8.2 Accessing Job Management" to access MANAGE Jobs (Device) .
Edit job step-by-step The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description Refer to
chapter
1. In MANAGE Jobs (Device) highlight a job to be edited.
2. EDIT (F3)
3. MANAGE Edit Job: Job Name, General page
<Name:> Rename the job.
<Device:> Cannot be edited.
The remaining functionality on this page is identical with the creation
of a new job. 8.3
)
DATA (F5) accesses MANAGE Data: Job Name . To view, edit and
delete points, lines and areas stored with the job. Points, lines and
areas are shown on separate pages. Selected sort and filter settings
apply.
9.2
)
SHIFT LOG (F5) accesses MANAGE Data Log: Job Name . To view,
edit and delete points, lines and areas stored with the job. Points,
lines and areas are sorted by time in one list.
9.5
4. PAGE (F6) changes to the Codelist page.
5. Are codes stored in the job?