Leica GPS1200+, Technical Reference Manual, Page: 1038 / 1442

Reference Line 1038
42.4 Managing Reference Lines/Arcs
42.4.1 Overview
Description There are two ways by which a reference line/arc can be defined.
Manually Enter
• A reference line/arc can be defined by manually entering known parameters.
• The line is only temporary and is not stored once the Reference Line application program
has been exited.
• Select <Ref to Use: Manually Enter> in REFLINE Choose Reference Line , Reference
page.
• Refer to "42.4.2 Manually Entering a Reference Line/Arc".
Select from Job
• Reference lines/arcs can be created, edited, stored and deleted in the <Control Job:> .
• The reference lines/arcs can be recalled for use later.
• Select
<Ref to Use: Select from Job> in REFLINE Choose Reference Line , Reference
page.
• Refer to "42.4.3 Selecting a Reference Line/Arc from the Job".