Leica GPS1200+, Technical Reference Manual, Page: 1039 / 1442

Reference Line 1039
42.4.2 Manually Entering a Reference Line/Arc
)
This chapter does not apply for staking to polylines.
Description This screen allows a reference line/arc to be temporarily defined using a number of methods.
Access step-by-step
Step Description
1. Refer to "42.2 Accessing Reference Line" to access REFLINE Reference
Line/Arc Begin .
2. CONT (F1) to access REFLINE Reference Task Menu .
3. REFLINE Reference Task Menu
This screen defines the task to be performed.
Measure to Line or Measure to Arc : Calculates the coordinates of a point from
its position relative to the reference line/arc.
Stake to Line or Stake to Arc : Allows points to be staked relative to the reference
line/arc.
Gridstake Line or Gridstake Arc : Allows a grid to be staked out relative to the
reference line/arc.
4. CONT (F1) to access REFLINE Choose Reference Line , Reference page.
5. REFLINE Choose Reference Line , Reference page
Select <Ref to Use: Manually Enter> .