GMX902 GG/GMX902 GNSS, Description of the System
7
1.5
Operation using Leica GNSS Spider
GNSS Spider
The reference station software GNSS Spider can be used to operate the instru-
ment.
Use
•
to connect from a computer to an instrument locally or remotely.
•
to configure instrument operation.
•
to monitor instrument operation.
•
to receive raw data streams automatically.
•
to stream RTK corrections.
•
to convert data to RINEX format automatically.
•
to archive data files automatically.
•
to distribute data files to FTP locations automatically.
•
to compute and stream out positions.
Operating system
1.6
Commands for Remote Control
LB2 commands
Special commands from Leica Binary (LB2) format can be used to communicate
with the instrument through the configured port. Documentation for LB2 is
available on request from a Leica Geosystems representative.
1.7
Accessories
Accessories
Additional equipment such as cables, antennas and power supply are listed in
the setup sections. Any further description of accessories is not part of this
manual.
Refer to the following Equipment Lists:
•
GNSS Networks and Reference Stations Equipment List
•
Structural Monitoring Equipment List
Operating system
Minimum service pack Recommended service
pack
XP Professional
SP2
SP3
2003 Server 2
SP1
SP2
2008 Server
SP1
SP1
Vista
TM
Ultimate
-
SP1
All manuals and user guides at all-guides.com