8
Functions
Leica DISTO™ DXT 776113
GB
D
N
S
FIN
DK
SLO
TR
GR
ROK
RUS
SK
CZ
H
PL
EST
LT
LV
BG
RO
Adding and subtracting areas
Calling up the area function and measuring areas.
Press
or
.
1x briefly: takes first distance measurement
(e.g. length)
1x briefly: takes second distance measurement
(e.g. width)
The result of the second area measurement, "+" flashes.
1x briefly: confirms the addition; the added area
results are displayed in the summary row.
Volume function
2x briefly: the
symbol is displayed.
1x briefly: takes first distance measurement
(e.g. length)
1x briefly: takes second distance measurement
(e.g. width)
The result of the area measurement from the values
already measured is displayed in the summary row.
1x briefly: takes the third distance measure-
ment (e.g. height). The value is displayed in
intermediate line 1.
The calculated volume appears in the summary line,
the last three measured values appear in interme-
diate lines 1, 2, 3.
Press the
button
for longer
to display additional
room information such as circumference
,
ceiling/floor area
, surface area of the walls
.
Indirect Measurement
The instrument can measure distances with the
Pythagoras method. This procedure facilitates in
measuring distances that are difficult to access.
)
Adhere to the prescribed sequence of meas-
urements:
•
All target points must be vertical or horizontal on
the surface of the wall.
•
The best results are achieved when the intrument
is rotated around a fixed point (e.g. the stop
bracket is fully extended and the instrument is
placed against a wall).
•
To take the measurement, the minimum/
maximum function can be called up. The minimum
value is used for measurements that must be at
right-angles to the target; the maximum distance
is used for all other measurements.
)
Make sure that the first measurement and the
distance to be measured are at right angles. Use the
minimum/maximum function.
