background image

Recording pictures (basic)

32

 

Correct posture for taking good 
pictures

To take pictures without blurring:
• Hold the camera gently with both hands, 

keep arms stationary at your side and 
stand with your feet slightly apart.

• Be careful not to move the camera when 

you press the shutter button.

• Do not cover the microphone or the AF 

assist lamp with your finger

s

 or other 

objects.

• Do not touch the lens part.
• Do not cover the photo flash with your 

finger or other objects.

1

 : When holding the camera sideways

2

 : When holding the camera vertically

A

 : Photo flash

B

 : AF assist lamp

• For the following modes and methods, 

keep the camera steady. Use a tripod for 
best results. By combining the use of a 
tripod with the self-timer (P44), you can 
avoid blurring caused when you press the 
shutter button.
–Slow sync./Red-eye reduction [

u

(P41)

–[NIGHT PORTRAIT] (P64), [NIGHT 

SCENERY] (P64), [CANDLE LIGHT] 
(P66), [FIREWORKS] (P67), [PARTY] 
(P67), [STARRY SKY] (P68) in scene 
mode (P61)

–When you have reduced shutter speed 

(P55, 56)

Focusing

• The focus range is 50 cm to 

Z

 (Wide), 

1.2 m to 

Z

 (Tele).

• If you press the shutter button fully without 

prefocusing, pictures may be blurry or 
unfocused.

• When the focus indication is blinking, the 

subject is not focused. Press the shutter 
button halfway and focus on the subject 
again.

• If the camera will not focus after a few 

tries, turn it off and on and try again.

• In the following cases, the camera cannot 

focus on subjects properly.
–When including both near and distant 

subjects in a scene.

–When there is dirt or dust on the glass 

between the lens and the subject.

–When there are illuminated or glittering 

objects around the subject.

–When taking a picture in a dark place.
–When the subject is moving fast.
–When the scene has low contrast.
–When jitter occurs.
–When recording a very bright subject.
We recommend taking pictures using 
manual focus (P83), prefocus (P84) or 
AF/AE lock (P85). In dark places, the AF 
assist lamp (P77) may turn on to focus on 
the subject.

• Even if the focus indication appears and 

the subject is focused, it is cancelled 
when you release the shutter button. 
Press the shutter button halfway again.

B

A

1

B

A

2

Summary of Contents for D-Lux 2

































































































































Reviews: