TS_010
P1
P2
P0
a
c
b
For TS with Help me navigate:
From behind instrument:
P0 Setup
P1 Current position
P2 Point to be staked
a
Distance
b
Horizontal angle
c
Cut or fill
For information on camera and images refer to "32 Camera & Imaging".
The pages shown are from a typical working style. An extra page is available
when a user-defined page is used.
The selected view of the 3D viewer is the one last used,
•
when leaving the app and returning to it.
•
when turning off and on the instrument.
For an explanation of the graphical symbols refer to "35.4.4 Orientation Infor-
Key
Description
Measure
For GS:
To start measuring the point being staked. The key changes
to
Stop
. The difference between the current position and
the point being staked is still displayed.
For TS:
To measure a distance and store distance and angles.
Stop
For GS:
To end measuring the point being staked. When
Automati-
cally stop point measurement
is checked in
GS Quality
Control
,
General
page recording of positions ends automat-
ically as defined by the stop criteria. The key changes to
Store
. After ending the measurements, the differences
between the measured point and the point to be staked are
displayed.
☞
Stake Points,
page
Stakeout
903
