If staking local grid points with GNSS, always ensure that the correct coordi-
nate system is being used. For example, if the points to be staked are stored in
WGS 1984, the active coordinate system must also be WGS 1984.
It is possible to stake:
•
Position only points.
•
Height only points.
•
Points with full sets of coordinates.
Height type of the point to be
staked:
Orthometric OR ellipsoidal
Height type computed for current
position:
Orthometric OR ellipsoidal depend-
ing on the
•
configured transformation,
•
availability of a geoid model,
•
height type of the point to be
staked.
If possible, the height type of the
point to be staked is computed for
the current position.
Heights can be taken into account from
•
the vertical component of a coordinate triplet.
•
a
D
igital
T
errain
M
odel.
The DTM licence key must be loaded. Refer to "29.3 Load licence keys" for
information on how to enter the licence key.
If loaded, the height of the points to be staked can be edited in the field.
Codes can be attached to staked points. The behaviour of the coding function-
ality depends on the definition of a page with editable fields for coding and
attributes.
The principles for averaging are identical to the averaging principles of the
Measure app.
51.2
Accessing Stakeout
Select
Leica Captivate - Home: Stake points
.
The points to be staked are stored in the selected design job.
Points which are measured during staking out are stored in the selected job.
51.3
Configuring Stakeout
Select
Leica Captivate - Home: Stake points
. Press
Fn
Settings
.
Coordinate system
Point types
Height types
Height source
Coding of staked
points
Averaging of staked
points
Access
☞
Access
894
Stakeout
