Leica Captivate, Technical Reference Manual

Page: 627 / 1060

Next step
Page
to change to the 3D viewer page.
The 3D viewer page shows a 2D, 3D, cross section and long section view of
the design data at the selected chainage.
Segment to access Segment Info - Start Point / Segment Info - End Point .
If a value is unavailable in the design data, the field is shown as ----- .
Key Description
OK To return to the previous panel.
Segment - To move to the previous segment.
S To move to the next segment.
End point or
Start point
To change between the start point and the end point of the
segment.
Page To change to another page on this panel.
Description of fields
Field Option Description
Line name Display only The name of the selected line.
Chainage Display only The chainage of start/end point of the seg-
ment.
Easting,
Northing
and
Height
Display only The East/North coordinate and height of the
start/end point of the segment.
Hz tangent Display only The tangent direction at the start/end point
of the segment.
Hz radius Display only The radius at the start/end point of the seg-
ment.
Hz type Display only The current segment type.
Next step
Page
to change to the Vertical alignment page.
Segment Info - Start
Point/
Segment Info - End
Point,
Hz alignment page
Roads - General 627