Leica Captivate Technical Reference Manual Download Page 205

Page: 205 / 1060

For RTK rover:

•

Connection Settings

GS connections

page, highlight

Remote

(OWI)

Edit

For CS35:

•

Unavailable. Use Windows to configure a connection.

Key

Description

To accept changes and return to the panel from where this

panel was accessed.

Control

To configure more parameters.

Device

Available unless an Internet connection is used. To create,

select, edit or delete a device. Refer to "20.2 Accessing Devi-

ces".

Description of metadata

Metadata

Description

Connection

The connection configured for the ports. Any port which is

not configured is automatically assigned the remote connec-

tion.

Device

The hardware connected to the chosen port.

18.11

PPS output

The PPS output is an optional interface requiring a special port.

PPS stands for

ulse

econd. It is a pulse that is output at a specified

interval time. The pulse can be used to activate another device. Additionally, a

notification message can be output through the GS25 ports P1, P2, P3, P4 or

BT when a PPS output occurs.
For example, in aerial photography, an aerial camera can be configured to take

a photo each time it receives a pulse from the instrument.

The settings on this panel define the output port and parameters for the PPS

option. This panel is available if the instrument is fitted with a PPS output port.

This option is only available on GS25.

Access

Remote OWI Connec-

tions

☞

Description

☞

Connections - All other connections

205

Summary of Contents for Captivate





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands

Leica Captivate, Technical Reference Manual

Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands