Leica Builder M power, User Manual

Page: 152 / 233

152 Builder
EDM Settings
12 EDM Settings
12.1 EDM
Description With the instrument different settings are available for measurements with red dot
(without reflectors) and fine/fast (with reflectors). The LED on the keyboard indi-
cates the selected type. Depending on the selected type the selection of prism types
is different. Red dot contains the flat prism as the only one and isn't displayed.
Beside the settings of the EDM it is possible to set the reflector height.
)
Descriptions apply only to Builder M power and RM power.
Access step-by-
step
Step Description
1.
Turn on the instrument by pressing the key.
2.
Press the key.
)
EDM settings are not accessible during the following:
•
CONFIG Mode : Choice list is opened.
• THEO Mode : Level or orientation procedure is running.
• PROG Mode : „YES or NO“ decision, for example „Station and Orienta-
tion will be changed and set“ or Point List Search is running.
• DATA Mode : One of the procedures RS232, POINTS or JOB is running.