Leica Builder M power, User Manual

Page: 139 / 233

Data Management Mode, for
Builder RM, M power and RM power Builder 139
11.3 Jobs
Description Jobs are a summary of different types of data e.g. fixpoints, measurements, result,
etc. The job definition consists of the input of job name, operator and remark. Addi-
tionally, the system generates time and date at the time of creation.
Active job The active job is the one in which data is stored to. One job is always considered the
active job.
Default job
A job called
Default
is always available on the instrument. The job
Default
is active
until a user defined job is created and selected.
Create a new job
step-by-step
Step Description
)
Make sure that DATA Mode is active.
1. Press JOB to access job management.
2. Press NEW to create a new job.
3. Enter new job name.
4. Accept with OK .
)
The new job is set as active job.