Leica Builder M power, User Manual

Page: 100 / 233

100 Builder
Application Programs, for Builder R, RM,
M power and RM power
10.2 Layout
Description The application program Layout is used to place markers in the field at predeter-
mined points. These predetermined points are the points to be staked. The points to
be staked are defined by entering line and offset or easting, northing and height
depending on the used setup method. For Builder RM, M and RM power the points
can also be selected from the memory. The program calculates and displays the
difference between the measured point and the point to be staked.
Diagram
P0 Station
P1 Current position
P2 Point to be staked
d1 < :> go forward or < :> go back
d2 < :> go right or < :> left
d3 < :> fill or < :> cut
P0
P1
P2
d2
d3
d1