background image

6

Care and Transport

6.1

Maintenance

For units that are exposed to high mechanical forces, for example through fre-

quent transport or rough handling, it is recommended to carry out test meas-

urements periodically.

6.2

Transport

When transporting the equipment in the field, always make sure that you carry

the product in its original container.

Never carry the product loose in a road vehicle, as it can be affected by shock

and vibration. Always carry the product in its container and secure it.
For products for which no container is available use the original packaging or

its equivalent.

When transporting the product by rail, air or sea, always use the complete ori-

ginal Leica Geosystems packaging, container and cardboard box, or its equival-

ent, to protect against shock and vibration.

When transporting or shipping batteries, the person responsible for the

product must ensure that the applicable national and international rules and

regulations are observed. Before transportation or shipping, contact your local

passenger or freight transport company.

6.3

Storage

Respect the temperature limits when storing the equipment, particularly in

summer if the equipment is inside a vehicle. Refer to "7 Technical Data" for

information about temperature limits.

Refer to "7 Technical Data" for information about storage temperature

range.

Remove batteries from the product and the charger before storing.

After storage recharge batteries before using.

Protect batteries from damp and wetness. Wet or damp batteries must be

dried before storing or use.

A storage temperature range of 0 °C to +30 °C/+32 °F to +86 °F in a dry

environment is recommended to minimise self-discharging of the battery.

At the recommended storage temperature range, batteries containing a

40% to 50% charge can be stored for up to one year. After this storage

period the batteries must be recharged.

Keep chargers and docking stations away from excessive dirt, dust and

contaminants.

After unpacking the product visually inspect the charger for possible dam-

age.

Unplug the product from the outlet before attempting any maintenance or

cleaning.

Transport in the field

Transport in a road

vehicle

Shipping

Shipping, transport of

batteries

BLK2GO

Li-Ion battery

Charger and docking

station

32

Care and Transport

Summary of Contents for BLK2GO













































Reviews: