14
AT930/AT960, Setup
Refer to the relevant application manual for further details on carrying out
measurements.
WARNING
Mounting the sensor on unstable or uneven ground may cause the sensor to tip over
or cause unreliable measurement results.
Precautions:
Ensure the ground is stable and even. Do not place the sensor over cracks in the
floor.
9.
Connect the AC power supply to the AT Controller and to a grounded mains
socket outlet.
10.
To turn on the Absolute Tracker, press the power switch on the frontpanel
of the AT Controller.
11.
The system automatically detects when the start-up cycle has finished. The
system will initialise automatically once the start-up cycle has finished.
12.
Start the application.
Step Description
