Leica A60 F, User Manual

Page: 17 / 32

Leica A60 F User Manual Assembling the Leica A60 F 17
Assembly
1. Unscrew both clamping screws on the
connecting pin.
2. Tilt the connecting pin backwards by 90°.
Load capacity
The flexarm is adjusted at the factory
so that it can keep the Leica A60 F and
the LED ring illuminator in balance – without
having to tighten the fastening lever to do so.
You can lock the working height if neces-
sary by tightening the fastening lever.
3. Retighten both Allen screws on the
connecting pin of the focusing arm. This
also locks the tilt.
4. Insert the connecting pins from the front
into the bore of the horizontal arm.
5. Tighten the side clamping screw on the
horizontal arm.
Flexible Arm Stand and Optics Carrier