Leica 6847 Instruction Manual Download

Page: 62 / 72

Car

e/S

tor

CARE/STORAGE

CAMERA HOUSING

• Keep your equipment meticulously clean, as any kind of dirt residue

presents a breeding ground for micro organisms.

• Only clean the camera with a soft, dry cloth. Stubborn dirt should first

be moistened with a watered-down detergent and can then be wiped

away with a dry cloth.

• Wet a soft cloth with tap water, wring it out thoroughly and wipe the

camera clean of any salt water spray. Then wipe it down thoroughly

with a dry cloth.

• Wipe the camera with a clean, lint-free cloth to remove stains and

fingerprints. Tougher dirt in hard to reach corners of the camera

housing can be removed with a small brush. Take care not to touch the

shutter blades.

• Store the camera in a closed and padded container to prevent friction

damage and protect it against dust accumulation.

• Keep the camera in a dry, sufficiently ventilated place, where it will not

be subjected to high temperatures and humidity. Make sure to remove

all moisture from the camera if it was used in humid conditions.

• Do not store the camera in a leather case for extended periods of time

to prevent fungal contamination.

• Empty you camera bag completely if it ever gets wet during use. Your

equipment might otherwise be subjected to moisture and tanning

residue released by the moist leather.

• All mechanical bearings and sliding surfaces on your camera are

lubricated. Remember to press the shutter button several times every

three months to prevent the lubrication points hardening if the camera

will not be used for an extended period of time. We also recommend

repeated adjustment and use of all the other operating elements.

• When using your camera in tropical climates, make sure to expose the

equipment to sunlight and fresh air as much as possible to prevent

fungal growth. Storage in airtight containers or cases is recommended

only in conjunction with a desiccant like silica gel.

LENS

• A soft-bristle brush will usually suffice to remove dust from the outer

lenses. Remove more severe soiling with a clean, soft cloth that is

completely free of foreign matter. Wipe the lens in a circular motion

from the center outward. We recommend using microfiber cloths that

come in a protective container and are available from photography

shops and other optical retailers. These cloths are machine-washable

at 40°C. Do not use fabric softener and do not iron them. Never use

spectacle lens cleaning cloths, as these are soaked in chemicals, which

could damage the glass of the camera lenses.

• Attach a transparent UVA filter for optimal front lens protection in

unfavorable conditions (e.g. sand, salt water spray). Please remember

that the filter may create unwanted light reflections in some backlight

situations and in case of high contrasts.

• The lens caps supplied protect the lens against accidental fingerprint

smudges and rain.

• All mechanical bearings and sliding surfaces on your lens are

lubricated. Make sure to periodically move the focus ring and the

aperture setting ring to prevent seizing if the lens will not be used for

an extended period of time.

VIEWFINDER/LCD PANEL

• Switch off your camera and leave it to stand at room temperature for

around 1 hour if condensation has formed on or in the camera. The

condensation will disappear, once the camera temperature has

reached room temperature.

RECHARGEABLE BATTERY

• Remove the rechargeable battery if the camera will not be used for an

extended period of time, as the date and time setting will be lost latest

after 2 months.

• Lithium-ion rechargeable batteries should only be stored partially

charged, i.e. not fully depleted or fully charged. The camera LCD panel

will show the current charge level of the battery. Charge the battery

twice a year for around 15 minutes to avoid deep discharge in case of

very long storage periods.

MEMORY CARDS

• Make sure to store memory cards in their anti-static container when

not in use.

• Do not store memory cards where they will be exposed to high

temperatures, direct sunlight, magnetic fields or static electricity.

Always remove the memory card if the camera will not be used for an

extended period of time.

• We recommend formatting the memory card from time to time,

because fragmented residual data from deleted files may block some of

its storage capacity.

Summary of Contents for 6847









































































Search results

Summary of Contents for 6847

Reviews:

Related manuals for 6847

Brands by name

Popular brands

Leica 6847, Instruction Manual

Search results

Summary of Contents for 6847

Reviews:

Related manuals for 6847

Brands by name

Popular brands