Leica BIOSYSTEMS CM3600 XP, Instructions For Use Manual

Page: 27 / 86

27
Leica CM3600 XP
Installation
5
• GFCI switch
• Automatic cutout
• Fuse protecting the main power switch
GFCI switch (
→
Fig. 7- 4 ) and (
→
Fig. 9- 4 )
4
Fig. 9
If the GFCI switch (
→
Fig. 9- 4 ) is triggered, it will be in the lower position.
• To switch it back on, flip the GFCI switch upwards.
Note
To check the function, trigger the GFCI switch once a month.
Automatic cutout ( → Fig. 7- 9 ) and ( → Fig. 10- 9 )
9
Fig. 10
If the automatic cutout (
→
Fig. 10- 9 ) is triggered, the switch will be in the
lower position.
• Flip it upwards to switch it back on.
Fuse protecting the main power switch (
→
Fig. 11- 10 )
10
Fig. 11
After the automatic cutout has been activated, it will be in the lower
position.
• Flip it upwards to switch it back on.
5.4 PC
The Leica CM3600 XP is equipped with a commercially available computer with monitor, keyboard and
mouse. For further information, please refer to the manual of the PC.
Note
If a computer is to be provided by the user, please request the required PC configuration in advance
from your responsible Leica sales company.