![Leibinger JET Rapid Operating Manual Download Page 34](http://html.mh-extra.com/html/leibinger/jet-rapid/jet-rapid_operating-manual_1872494034.webp)
Page 32
High Speed Line
Release R.1.02
The slightly beveled surface of the head cover allows an optimized mounting of the print head.
Printhead position at
right angle
Printhead position
inclined
Ink drops that hit the surface of a substrate
tend to burst in smaller drops and not all
drops are absorbed by the substrate.
When the print head is mounted vertically, the
bursting ink drops may lead to a faster
contamination of the print head.
With the angled surface of the outlet side of the
print head, it is possible to mount the print head
in a slightly inclined position.
The ink drops will not hit the substrate at a 90°
angle. Therefore, the bursting ink drops will take
a direction away from the outlet, which will lead
to less contamination of the print head.
Generally:
The distance between print head and substrate should not be below
5 mm
in order to
avoid the contamination of the print head by rebounding ink drops. A larger distance may have
negative effects on the quality of the printouts.
Recommended:
5 mm
Recommended:
5 mm
Surface
Surface
Summary of Contents for JET Rapid
