6
LITHO IN U.S.A.
988-0140-30
CABLE TIE
CABLE TIE
CABLE TIE
CABLE TIE
CABLE TIE
TRANSDUCER
TRANSDUCER
TRANSDUCER
TRANSDUCER
TRANSDUCER
CABLE TIE
CABLE TIE
CABLE TIE
CABLE TIE
CABLE TIE
TRANSDUCER
TRANSDUCER
TRANSDUCER
TRANSDUCER
TRANSDUCER
Trolling Motor Mount - PD-W Only
The top of the transducer is curved to fit the contour of the motor on
electric trolling motors. Attach it using a automotive hose clamp avail-
able at any auto parts store.
1. Measure the diameter of your trolling motor and purchase a hose
clamp slight larger.
2. Determine the mounting location. It should be ahead of the skeg.
Water turbulence is at a minimum at this position. Some trolling
motors have a wire brace from the motor to the skeg. The transducer
won’t be affected by this.
3. Position the transducer to aim straight down with the cable angled
away form the direction of travel. Mount it with the hose clamp.
4. Tie the cable to the motor shaft using plastic cable ties (available at
automotive or electrical supply stores). Be certain there is enough
slack for the motor to turn freely.