Maintenance and cleaning
46 / 74
1.0
Vento
®
II
5.4 Install/Remove drive unit
1. Disconnect the cables from the electric box.
2. Undo the 4 screws
(1)
.
3. Remove the complete drive unit
(2)
.
4. Install the complete drive unit
(2)
using the same
procedure in reverse.
5. Connect the cables to the electric box.
Maintenance work
1. Check the drive belt and replace if necessary.
2. Remove the complete drive unit in the event of a motor defect.
5.5 Blower
Caution!
Risk of injury due to high suction power of the blower.
Long hair or loose objects can be snagged in the blower.
•
Keep loose objects away from the area in front of the intake grille.
•
Tie up long hair.
The blower does not require maintenance.
If there is a malfunction, check the blower for blockages due to contamination. Clean the blower in dry condition if
necessary, and check it can turn freely.
The blower cover with the intake grille can be removed
for cleaning if necessary, by unscrewing the screws. Re-
new the self-locking screws when reinstalling the cover!
Summary of Contents for Vento II
Page 73: ...Vento II 1 0 73 74 ...
