Appendix
6 Appendix
6.1 EC Declaration of conformity
EC Declaration of Conformity
In accordance with the EC Machinery Directive 2006/42/EC, app. II, 1.A
Manufacturer:
LEHNER
Maschinenbau GmbH
Häuslesäcker
14
89198 Westerstetten
Person resident in the Community who is entitled to assemble the relevant technical documents:
Helmut Lehner
LEHNER
Maschinenbau
Häuslesäcker
14
89198 Westerstetten
Description and identification of the machine:
Product:
POLARO®
Type:
70/110/170
/250
Function:
The POLARO® is a spreader for distributing road salt, gravel, sand, fertilizer or granulates
of various kinds. It is produced in
four
sizes. These differ in the hopper capacity, 70, 110
,
170
and 250
litres.
A manually operated slide sets a constant flow rate of the medium being spread. A separate motor drives a
slowly rotating agitator, which can be installed both horizontally and vertically. The agitator keeps the
spreading material mobile. The speed of the spreading disc, and thus the spreading width and the slide
(open/close), is controlled from the operator's cab by means of a control panel.
It is expressly declared that the machine is in accordance with all relevant provisions of the following
EC Directives:
2006/42/EC
EC Machinery Directive 2006/42/EC
2004/108/EC
(Electromagnetic Compatibility) Directive 2004/108/EC of the European
Parliament and the Council dated 15 December 2004 on the harmonisation of
legal regulations in the member states regarding electromagnetic
compatibility and replacing Directive 89/336/EEC
Source of the applied harmonised standard acc. to Article 7, para. 2:
EN ISO 12100-2:2003-11
Safety of Machinery – Basic concepts; general principles for design –
Part 2 Technical principles
EN ISO 14121-1:2007
Safety of Machinery – Risk assessment – Part 1: Principles
(ISO14121-1:2007)
EN 50498:2010
Electromagnetic compatibility - Product family standard for electronic
equipment installed subsequently in vehicles
EN ISO 14982:2009
Electromagnetic compatibility - Agricultural and forestry machinery
Source of the applied other technical standards and specifications:
EN ISO 12100-1:2003-11
Safety of Machinery – Basic concepts; general principles for design –
Part 1: Basic terminology, methodology
Westerstetten, 01.02.2012
Place, date
Signature
Helmut Lehner
CEO
POLARO
®
1.1
17 / 34
Summary of Contents for POLARO
