18
3 Operating
the
POLARO
®
3.3 Setting the speed
The speed of the setting disc can be set on
a continuous scale using the rotary knob
on the control panel.
170
The value indicated on the display is the desired value which the
machine will attempt to maintain. If this value cannot be achieved due
to the motor having too high a load or the power supply being weak, the
value actually achieved is displayed once the motor has been powered
up.
The displayed values are not speed indicators, but set values.
3.4 Setting the slide opening
Ensure that the slide is closed.
1.
Set the slide controller on the spreader to the desired
2.
application
rate.
In position 0, the slide is closed, and in position 20,
it is opened as far as possible. In the area in between, the slide
opening can be
set on a continuous scale.
Summary of Contents for POLARO
Page 2: ......
Page 29: ...29 6 Appendix 6 3 Distribution box terminal assignment ...