Poollift Delphin page 10
If the Poollift is out of service for extended periods of time (e.g. in winter), it is recommended to
damp the seal of the cylinder before it is commissioned again.
Don’t keep the Poollift outside during winter, because remaining water in the cylinder could damage
the installation. Seperate the pressure water hose from the Poollifte after dismantling and turn the
operating lever in the upper position.
Afterwards push the cylinder in the upper and the lower position until the whole amount of the water
inside the cylinder has leaked out. After draining the cylinder keep the cylinder in the upper position.
If necessary close the Poollift in that position using the lock.
It is absolutely required to maintain your Poollift regularly.
How to replace the seals and pistons is described in the the document „Instructions for seal- and
piston-replacement“.
8. Packaging, Delivery and Storage
In some cases the Poollift will be deliverd disassembled in two wooden boxes.
The assemblage is carried out on the spot.
Please protect the Poollift from falling down, overturning and intense vibrations during the transport.
Store the Poollift in a dry, clean and dust-free interior at temperatures between 5° and 40°C and a
humidity of max. 80%.
The Poollift must not be exposed to the effects of chemicals!
