LEHMANN M300 LEGIC L043-A01 Operating Instructions Manual Download Page 17 | Manualshive

Page: 17 / 22

LEHMANN M300 LEGIC L043-A01 Operating Instructions Manual Download Page 17

BD

A M300 L043-A01 / -A02 2020-05-25 (GB)

17

REMOVE LEGIC MTSC CONFIGURATION ON RFID SYSTEM

With the SAM 64 (System Authorization Media) card, which is part of the LEGIC MTSC (Master-Token System-Control),
the previously created authorizations and configurations by using the SAM 63 card are deleted again in the RFID reader.
Following that, all types of transponders mentioned on page 2 under technical specifications can be used again. The lock
must be open when using the SAM 64 card.

Remove configuration with LEGIC SAM 64 card

Master

Hold the master card

in front of the reader.

SAM 64

Hold the LEGIC SAM 64

card in front of the reader.

Master

Hold the master card

in front of the reader.

Master

Hold the master card

in front of the reader.

If the lock is in delivery state (no master card programmed), you can hold the card LEGIC SAM 63 directly in front of
the RFID reader for configuration without a master card.

«
...
15
16
17
18
19
...
»

Summary of Contents for M300 LEGIC L043-A01























Reviews:

No comments