12
LEHLE GmbH · Germany · www.lehle.com · [email protected]
SELECTING THE FOOT SWITCH MODE
You can change the behaviour of the foot
switch, so it works latching, momentary or
in a mixed mode.
According to the foot switch mode follow-
ing configurations are given:
• Latching Mode:
The LEHLE foot switch “latches“ by a
press and release.
•• Momentary Mode:
The LEHLE foot switch triggers a contact
and disconnects once released.
••• Mixed Mode:
A mix between latching and momentary.
A short press lets the foot switch act as
latching, a longer press is momentary.
To change the mode please proceed as
follows:
1. Disconnect the power supply.
2. Press and hold the foot switch.
3. Reconnect the power.
4. The LED starts flashing in following
order:
• for Latching Mode
•• for Momentary Mode
••• for Mixed Mode
5. If you release the foot switch after the
first flash, the Latching Mode is selected.
After 2x flashes you‘re in the Momentary
Mode and after 3x it‘s the Mixed Mode.
6. The LEHLE PARALLEL SW II turns off
and reboots.
The selection of the foot switch mode is
stored inside and recalled every time the
pedal is powered on.
