3
MOUNTING THE PHOTOSENSOR
In most applications, the unit is mounted through a ceiling tile, with only the lens being visible from inside the room; the remainder of
the unit rests on top of the tile. It can also be mounted on or through the wall of a skylight light well. In these types of applications, an
accessory plastic mounting bracket is required. An accessory for mounting the unit to a J-Box is also available. The device has an
adjustable head to accommodate multiple mounting methods and building materials or fixture walls up to 1.25” thickness.
NOTE:
For ceiling thickness lower than 5/8”, the LMLS-500 must be used.
Fig 3: Mount Sensor to Ceiling
Ceiling Mounted
NOTE:
For Skylight and J-Box mounting, the shorter-tube LMLS-500 model is recommended.
Skylight Wall Mounted
Fig 4a: Surface Mount using
LMLS-MB2 Mounting Bracket
J-Box Mounted
Fig 4b: Surface Mount using LMLS-MB1
J-Box Mounting Bracket
0” - 5/8” (LMLS-500),
5/8" - 1.25" (LMLS-500-L)
adjustable for mounting
material
Attach cable
Ceiling
Lens
Mounting bracket
Cabling
Or
Remove
tab
Skylight light well
Summary of Contents for Wattstopper LMLS-500
Page 15: ...15...
