Troubleshooting
What is it doing?
Possible causes
Check and correct
Nothing. No audio, and the
power light does not illuminate.
Power is not connected.
Connect the power supply.
The power outlet is not
supplying power.
Check to see whether the outlet powers
other devices, such as a phone
charger.
The power supply is bad.
Call Vaddio technical support.
The microphone is on, but no
audio is available from the
corresponding line out.
The cable from the
microphone or the
microphone interface box is
not connected, or is bad.
Verify that the cable is connected to the
device.
Check the cable for correct pin-out and
continuity.
Echo or feedback.
Speaker audio needs to be
echo-canceled.
Connect the appropriate mixer output
to the AEC reference connector.
Use, Storage, and Care
Keep this device away from food and liquids. Do not attempt to take this product apart. There are no
user-serviceable components inside. Do not operate or store the device under any of the following
conditions:
n
Temperatures above 104° F (40° C) or below 32° F (0°C)
n
High humidity, condensing or wet environments
n
Inclement weather
n
Severe vibration
n
20,000 leagues under the sea
n
Dry environments with an excess of static discharge
Vaddio is a brand of Legrand AV Inc.·
· Phone 800.572.2011 / +1.763.971.4400 ·
Fax +1.763.971.4464 · Email
·
Vaddio is a registered trademark of Legrand AV Inc. All other brand names or marks are used for
identification purposes and are trademarks of their respective owners. All patents are protected under
existing designations. Other patents pending.
©2021 Legrand AV Inc.
Installation Guide for the EasyUSB MicPOD I/O Microphone Interface
