RS-232 Serial Communication Settings and Port Pin-outs
The RS-232 serial port (color-coded blue) on the back panel connects to a third-party controller.
RS-232 connector pin-out:
n
Pin 1: Not used
n
Pin 2: Not used
n
Pin 3: Not used
n
Pin 4: Not used
n
Pin 5: Not used
n
Pin 6: GND
n
Pin 7: TXD
n
Pin 8: RXD
Communication parameters:
Parameter
Value
Communication Speed
38400 bps
Start bits
1
Stop bits
1
Data bits
8
Parity
None
Flow control
None
Caution
Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in equipment
damage and will void the warranty.
Depending on the equipment connected to the RS-232 port, you may need a null-modem (crossover) cable.
Powering Up
Power up the AV Bridge 2x1 and the connected equipment at the same time, or power up the connected
equipment before you power up the AV Bridge 2x1.
Next Steps
The AV Bridge 2x1is now ready to configure. Until the product is fully configured, its full functionality is not
available. This information is available in the
Complete Manual for the AV Bridge 2x1Presentation
Switcher
.
Download manuals, dimensional drawings, and other information from
8
Installation Guide for the AV Bridge 2x1 Presentation Switcher
