Tynetec, a business unit of Legrand Electric Ltd
Cowley Road, Blyth Riverside Business Park, Blyth, Northumberland, NE24 5TF.
Tel: +44 (0) 1670 352371 www.tynetec.co.uk
Trusted Technology
Caring for People
869MHz Client Wandering
Door Alarm
Caring for People
_________________________________________________________________________
________________________________________________________________
Doc No. FM0877 V1.02 Page 2
ZXT444 D
OOR
C
O
N
T
A
C
T
F
req.
169.4
81
25
M
H
z
Envir
onme
nta
l G
rou
p I
I
Ma
de
in
U
K
tyn
ete
c
Magnet on
the door
Transmitter
on the door
frame
10mm Max
ZXT833
S:092047122
Iss-1
1093089F09
20W40
How to install the Door Alarm
The door alarm is designed for internal use only, it is not
suitable for external applications.
The transmitter unit and the magnetic door contact will be
held together with an elastic band to prevent the battery
being drained in transit.
Remove the elastic band and fix the transmitter unit to the
door frame using the self-adhesive foam pad provided.
Fix the magnet to the door alongside the “
CONTACT SIDE
”
label on the transmitter unit using the screws provided.
When the door is opened the magnet must move away from
the transmitter unit.
Note: maximum 10mm gap between the magnet and the
contact when the door is closed.
Telecare Radio ID
The door alarm includes a radio transceiver to communicate
with the Reach IP, Advent XT2 or Carer Response.
The Radio ID is a 10-digit
code printed on the
door alarm label...
Registering the Door Alarm onto a Reach IP
Login to Pulse CMP (www.tynetecpulse.com) and enter the
Reach IP Serial No. in the
ALARM UNIT
view. Press the
Accessories
button and enter the Radio ID code, Location,
Equipment type and the Active Time Span.
Press
Save
then
Synchronize
.
IMPORTANT
: when the door alarm is installed a test call
must be made to check operation and start the digital
heartbeat.
Alternatively, with the Reach IP in normal operating mode
undo the fixing screw and remove the stand or connector
cover to access the
⚫
Power button.
Press the
⚫
Power button to enter Control Mode, then press
and hold the
button
until the unit announces “
add radio
device
” then release.
Press the
⚫
button to confirm then activate the door alarm
by opening the door.
The Reach IP unit will sound a high beep if it’s a new device
and announce “
range test mode
”
.
Press
⚫
to confirm, or press
to step to the next function,
or press
to exit the mode.
Active time spans must be setup via Pulse CMP.
Ensure you are within an alarm time period then activate the
door alarm to check operation.
⚫
Power Button
DOOR FRAME
DOOR