LEGRAND Tynetec Aidcall ZXT482, Manual

Page: 1 / 4

Doc No. FM0664 issue B Page 1
Door Frame
Door
169MHz Telecare Devices
Intruder Door Contact
__________________________________________________________________________________________________________

Compatible with Reach at ‐ home alarms and
Advent xt warden call systems

Surface mount N/O door contacts

Surface mount transmitter unit

Low battery warning

Dimensions: 87mm x 87mm x 40mm (HxWxD)

Weight: 140 grams

Product Code: ZXT482
What is the Intruder Door Contact used for?
The intruder door contact is for use with “intruder mode” on the Reach at ‐ home alarms and Advent xt warden call system.
The contact should be fitted to the main door used to enter/exit the home.
Refer to the Reach/Advent xt user guide for details on the operation of intruder mode.
Where should the Intruder Door Contact be fitted?
The magnet is fixed to the door with the contact block as close as possible on the door frame. The transmitter unit should be wall
mounted internally within 3 metres of the door contact.
Typical Tools Required
Check for cables and pipes in the wall before using the drill.
Make sure the correct type drill bit and screwdrivers are used.
Fitting the Transmitter
Undo the 2 screws and remove the lid from the A
transmitter unit.
Break out the most appropriate cable entry
point in the back box.
Fix the back box to the wall with the screws & plugs
provided through the 2 fixing holes “ A ” A
Fitting the Door Contact
Connect 2 wires to the door contact (see drawing below).
Fix the part with the wires to the door frame with
the screws provided.
Clip the wire tidily with the self adhesive clamps provided.
Fix the magnet part to the door with the screws provided.
Note: there should be no more than 10mm gap between the
two parts of the door contact when the door is closed.
The contacts must part when the door is opened.
MAGNET
TRANSMITTER
BACK BOX
DOOR FRAME
DOOR
Tynetec and Aidcall are business units of Legrand Electric Ltd
Unit 10 Cowley Road, Blyth Riverside Business Park, Blyth
Northumberland, NE24 5TF. Tel: 01670 352 371 Fax: 01670 362 807
Email: sales@tynetec.co.uk Web : www.tynetec.co.uk