LEGRAND tynetec Aidcall ZXT434, Quick Start Manual, Page: 3 / 4

Doc No. FM0465 issue E Page 3
Registering an Alarm Door Contact onto an Advent xt warden call system
1. Put the A dvent xt system into radio device learn mode…
2. Activate the door contact
…
3.
Exit the Advent xt system radio device learn mode…
4. Activate the door contact and check a client wandering alarm call is reported on the warden call system.
Deleting an Alarm Door Contact from an Advent xt warden call system
Press the LINE key and wait for the “ Ready ” pro mpt.
Enter 5 0 0 1 followed by the

key.
Enter the flat number the alarm door contact is being deleted from followed by the

key.
Activate the door contact to be deleted.
W ait for the “ Pendant Disabled – Enter Flat ” prompt.
Press the # key and wait for t he “ Ready ” prompt , then press the LINE key to clear the connection.
Refer to the Advent xt operator’s manual (Doc No. FM0420) provided with the warden call system for more
information on programming and testing radio devices.
Using the Manager’s DECT telephone;
Press the LINE key and wait for the “ Ready ” prompt.
Enter 5 0 0 0 followed by the

key.
Enter the flat number the alarm door contact is being installed in
followed by the

key.
You now have 1 minute to activate the door contact.
“ Ready”
Using the Manager’s DECT telephone;
Press the # key and wait for the “ Ready ” prompt.
Press the LINE key to clear the connection and the warden call system is
now back in normal operating mode.
Open the door.
W ait for the “ Enter Location Code ” prompt then press 0 (no location)
followed by the

key.
W ait for the “ Pendant Enabled – Enter Flat ” prom pt.
“ Ready”