LEGRAND The Radiant Collection, Installation Manual

Page: 16 / 30

16
installation & setup
step six
|
attach the screwless wall plate
1
Noting which side faces out, align the sub-plate over the device screws. Use
the sub-plate screws (provided) to secure the sub-plate to the smart switch.
2
Tighten the device screws to secure the smart switch to the electrical box.
3
Angle the end of the screwless wall plate over the top edge of the
sub-plate. Push the screwless wall plate down and in until it “snaps” into
place over the sub-plate.
NOTE:
To remove the wall plate, place the tip of a flat blade screwdriver into the slot
under the wall plate and twist gently.