LEGRAND Raritan SRC-0100, User Manual

Page: 567 / 698

555
If a TFTP server is available, you can use it and appropriate configuration
files to perform any or all of the following tasks for a large number of
SRC devices in the same network.

Initial deployment

Configuration changes

Firmware upgrade

Downloading diagnostic data
This feature is drastically useful if you have hundreds or even thousands
of SRC devices to configure or upgrade.
Warning: The feature of bulk configuration or firmware upgrade via
DHCP/TFTP only works on standalone SRC devices directly connected
to the network. This feature does NOT work for slave devices in the
cascading configuration.
Tip: For the other alternatives, see Configuration or Firmware Upgrade
with a USB Drive
(on page 539) or
Raw Configuration Upload and
Download
(on page 577).
In This Chapter
Bulk Configuration/Upgrade Procedure................................................. 555
TFTP Requirements ................................................................................ 556
DHCP IPv4 Configuration in Windows..................................................... 556
DHCP IPv6 Configuration in Windows..................................................... 566
DHCP IPv4 Configuration in Linux .......................................................... 573
DHCP IPv6 Configuration in Linux .......................................................... 575
Appendix C Bulk Configuration or Firmware
Upgrade via DHCP/TFTP