LEGRAND Raritan SRC-0100, User Manual

Page: 554 / 698

Appendix B: Configuration or Firmware Upgrade with a USB Drive
542
USB drive requirements:

The drive contains either a single partition formatted as a Windows
FAT32 filesystem, or NO partition tables (that is, a
superfloppy-formatted drive).

The drive contains a configuration file called
fwupdate.cfg in its root
directory. See
fwupdate.cfg
(on page 542).
Configuration Files
There are three types of configuration files.

fwupdate.cfg:
This file MUST be always present for performing configuration or
firmware upgrade tasks. See
fwupdate.cfg
(on page 542).

config.txt:
This file is used for configuring device settings. See config.txt (on
page 546).

devices.csv:
This file is required only when there are device-specific settings to
configure for multiple SRC devices. See
devices.csv
(on page 549).
Raritan provides a Mass Deployment Utility, which helps you quickly
generate all configuration files for your SRC. See
Creating
Configuration Files via Mass Deployment Utility (on page 550).