LEGRAND Raritan SRC-0100, User Manual

Page: 526 / 698

Chapter 8: Using the Command Line Interface
514
Setting the LED Operation Mode
This command syntax determines whether a specific rack unit on the
specified asset strip follows the global LED color settings.
config:# rackUnit <n> <rack_unit> LEDOperationMode <mode>
Variables:

<n> is the number of the FEATURE port where the selected asset
strip is physically connected. For the SRC device with only one
FEATURE port, the number is always 1.

<rack_unit> is the index number of the desired rack unit. The index
number is available on the asset strip or the Asset Strip page of the
web interface.

<mode> is one of the LED modes:
automatic or manual.
Mode Description
automatic This option makes the LED of the specified rack
unit follow the global LED color settings. See
Setting LED Colors for Connected Tags
(on
page 511) and Setting LED Colors for
Disconnected Tags (on page 512).
This is the default.
manual This option enables selection of a different LED
color and LED mode for the specified rack unit.
When this option is selected, see Setting an LED
Color for a Rack Unit (on page 514) and Setting
an LED Mode for a Rack Unit
(on page 514) to
set different LED settings.