LEGRAND Raritan SRC-0100, User Manual

Page: 487 / 698

Chapter 8: Using the Command Line Interface
475
Deleting a User Profile
This command deletes an existing user profile.
config:# user delete <name>
Changing Your Own Password
Every user can change their own password via this command if they have
the Change Own Password privilege. Note that this command does not
begin with
user.
config:# password
After performing this command, the SRC prompts you to enter both
current and new passwords respectively.
Important: After the password is changed successfully, the new
password is effective immediately no matter you type the command
"apply" or not to save the changes.
Example
This procedure changes your own password:
1. Verify that you have entered the configuration mode. See Entering
Configuration Mode
(on page 403).
2. Type the following command and press Enter.
config:# password
3. Type the existing password and press Enter when the following
prompt appears.
Current password:
4. Type the new password and press Enter when the following prompt
appears.
Enter new password:
5. Re-type the new password for confirmation and press Enter when
the following prompt appears.
Re-type new password: