LEGRAND Raritan SRC-0100, User Manual

Page: 397 / 698

Chapter 8: Using the Command Line Interface
385
Network Service Settings
This command shows the network service settings only, including the
Telnet setting, TCP ports for HTTP, HTTPS, SSH and Modbus/TCP
services, and SNMP settings.
# show network services <option>
Variables:

<option> is one of the options:
all, http, https, telnet, ssh, snmp,
modbus and zeroconfig.
Option Description
all Displays the settings of all network services,
including HTTP, HTTPS, Telnet, SSH and SNMP.
Tip: You can also type the command without
adding this option "all" to get the same data.
http Only displays the TCP port for the HTTP service.
https Only displays the TCP port for the HTTPS service.
telnet Only displays the settings of the Telnet service.
ssh Only displays the settings of the SSH service.
snmp Only displays the SNMP settings.
modbus Only displays the settings of the Modbus/TCP
service.
zeroconfig Only displays the settings of the zero configuration
advertising.