LEGRAND Raritan SRC-0100, User Manual

Page: 213 / 698

Chapter 6: Using the Web Interface
201
4. To configure SNMP notifications:
a. Select the 'Enable SNMP notifications' checkbox.
b. Select a notification type -- SNMPv2c trap, SNMPv2c inform,
SNMPv3 trap, and SNMPv3 inform.
c. Specify the SNMP notification destinations and enter necessary
information. For details, refer to:

SNMPv2c Notifications
(on page 366)

SNMPv3 Notifications (on page 367)
Note: Any changes made to the 'SNMP Notifications' section on the
SNMP page will update the settings of the System SNMP Notification
Action, and vice versa. See
Available Actions
(on page 253). To add
more than three SNMP destinations, you can create new SNMP
notification actions. See
Send an SNMP Notification (on page 269).
5. You must download the SNMP MIB for your SRC to use with your
SNMP manager.
a. Click the Download MIBs title bar to show the download links.
b. Click the PDU2-MIB download link. See
Downloading SNMP
MIB
(on page 370).
6. Click Save.
Configuring SMTP Settings
The SRC can be configured to send alerts or event messages to a specific
administrator by email. See
Event Rules and Actions
(on page 237).
To send emails, you have to configure the SMTP settings and enter an IP
address for your SMTP server and a sender's email address.
If any email messages fail to be sent successfully, the failure event and
reason are available in the event log. See
Viewing or Clearing the Local
Event Log (on page 325).
To set SMTP server settings:
1. Choose Device Settings > Network Services > SMTP Server.
2. Enter the information needed.
Field Description
IP address/host
name Type the name or IP address of the mail server.