LEGRAND Raritan SRC-0100, User Manual

Page: 209 / 698

Chapter 6: Using the Web Interface
197
Configuring Network Services
SRC supports the following network communication services.
HTTPS and HTTP enable the access to the web interface. Telnet and SSH
enable the access to the command line interface. See
Using the
Command Line Interface
(on page 374).
By default, SSH is enabled, Telnet is disabled, and all TCP ports for
supported services are set to standard ports. You can change default
settings if necessary.
Note: Telnet access is disabled by default because it communicates
openly and is thus insecure.
Submenu command Refer to
HTTP Changing HTTP(S) Settings (on page 198)
SNMP Configuring SNMP Settings (on page 199)
SMTP Server
Configuring SMTP Settings
(on page 201)
SSH
Changing SSH Settings
(on page 203)
Telnet Changing Telnet Settings (on page 204)
Modbus
Changing Modbus Settings
(on page 204)