LEGRAND Raritan SRC-0100, User Manual

Page: 178 / 698

Chapter 6: Using the Web Interface
166
Setting Default Measurement Units
Default measurement units are applied to all SRC user interfaces across
all users, including users accessing the SRC via external authentication
servers.
For a list of affected user interfaces, see User Interfaces Showing
Default Units (on page 166). The front panel display also shows the
default measurement units.
Note: The preferred measurement units set by any individual user or by
the administrator on a per-user basis will override the default units in
the web interface and command line interface. See
Setting Your
Preferred Measurement Units (on page 165) or Creating Users (on
page 156).
To set up default user preferences:
1. Click User Management > Default Preferences.
2. Make changes as needed.
Field Description
Temperature unit Preferred units for temperatures -- (Celsius)
or (Fahrenheit).
Length unit Preferred units for length or height -- Meter or
Feet.
Pressure unit Preferred units for pressure -- Pascal or Psi.

Pascal = one newton per square meter

Psi = pounds per square inch
3. Click Save.
User Interfaces Showing Default Units
Default measurement units will apply to the following user interfaces or
data:

Web interface for "newly-created" local users when they have not
configured their own preferred measurement units. See
Creating
Users
(on page 156).

Web interface for users who are authenticated via LDAP/Radius
servers.

The sensor report triggered by the "Send Sensor Report" action. See
Send Sensor Report
(on page 264).

Front panel LCD display.